Microwave combi-oven displays error code

Issue

  • Microwave combi-oven displays error code
  • Fault codes in microwave combi-ovens

Applies to

  • Microwave combi-oven

Resolution

When the software error occurs, the oven display shows an error message.

In this section, you will find a list of the problems that you can handle on your own.

Code and description

Remedy

F240, F439 - the touch fields on the display do not work properly.

Clean the surface of the display. Make sure there is no dirt on the touch fields.

F601 - there is a problem with the Wi-Fi signal.

Check your network connection. Refer to the "Before first use" chapter, Wireless connection.

F604 - the first connection to Wi-Fi failed.

Turn the oven off and on and try again. Refer to the "Before first use" chapter, Wireless connection.

F908 - the oven system cannot connect with the control panel.

Turn the oven off and on.

F131 - the temperature of the magnetron sensor is too high.

Turn the oven off and wait until it cools down.

Turn the oven on again.

F602, F603 - Wi-Fi is not available

Turn the oven off and on.

If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.

Was this article helpful?

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.

To the webshop

Find your User Manual

Solve problems and find instructions and other documentation for your product.

Find manual

Book a repair

Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Book service