Oven displays error message E0020
Resolution
Issue:
- Oven displays the error message E0020
- Oven internal light is not working
Applies to:
- integrated oven
Resolution:
1. Check the light bulb in the oven.
- Replace if it is faulty
- You can buy a new bulb from our Webshop
2. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Was this article helpful?
Related Articles
- After a short power failure, Demo appears on the display and my oven will not heat up - AEG
- AEG Oven and Cooker Functions/Symbols
- Gas grilling - Open door
- The time is not shown on the display when the oven is turned off
- The oven door cannot be opened after pyrolytic cleaning
- Oven door making unusual noises
- Using the Oven Grill Function
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- The 'END TIME' and 'TIME DELAY' cooking functions are not available, even though they are mentioned in the user manual
- Water gets on the kitchen floor when using the oven