Robotic vacuum doesn’t charge or doesn't seem to finish charging
Issue
- Robotic vacuum doesn’t charge or doesn't seem to finish charging
Applies to
- Robotic vacuum cleaner
Resolution
If the robotic vacuum doesn’t charge or doesn't seem to finish charging, please refer to the following:
1. The power cord and adapter are not properly assembled, and/or connected to the mains.
- Solution: Connect the adapter connector to the charging base. Connect the power cable to the mains.
2. The charging plates on the appliance and the charging base are not connected.
- Solution: Make sure that the charging base and the appliance stand on an even surface and the charging plates on the appliance and the charging base stand are connected.
3. Ensure that the plug and cable are not damaged.
4. Clean the charging pads both on the appliance and the charger with a dry cloth.
- For more information refer to the user manual. Download .
Was this article helpful?
Related Articles
- Updating the smart phone app
- Robotic vacuum stops while running, with no lights, error message or the display is blank
- Robotic vacuum starts to clean just a specific part of the room
- If the robotic vacuum gets stuck (under the bed, between the chairs)
- My robotic vacuum cleaner shows error code E17
- Will the clock settings be saved after exchanging batteries or when the robotic vacuum cleaner was not charged for a longer time period?
- Will I need to use another vacuum cleaner apart from the robotic vacuum?
- Where can I buy accessories (filters, brushes, battery packs, spare parts) for my robotic vacuum?
- Robotic vacuum main brush is not working well
- Robotic vacuum cleaning results are worse than previous cleanings