Stick vacuum cleaner has reduced or no suction power
Issue
- Stick vacuum cleaner has reduced or no suction power
- Cleaning the stick vacuum cleaner
Applies to
- Stick vacuum cleaner
Resolution
1. Clean or wash the filters and put them back. Filters should be cleaned at least once a month.
Take out the filters from the dust container and empty the contents into a dustbin.
When the dustbin is not cleaned regularly this will lead to clogging the dustbin, which will affect the dust pickup and stress the fan motor.
The filters must be cleaned at regular intervals to ensure a high-cleaning performance
Please refer to the user manual for detailed information on the maintenance of your specific model. The user manual can be downloaded HERE.
2. Clean and remove entangled hair, threads, and fibres from the brush roll
Use a pair of scissors to remove threads etc. Reassemble the brush roll, making sure it can spin freely.
Please refer to the model-specific maintenance guides:
Cordless vacuum cleaner maintenance (AEG Ultimate 8000 / Hygienic 8000 / Animal 8000 series)
Cordless vacuum cleaner maintenance (AEG QX6/QX7/QX8, AEG 5000 series)
Cordless vacuum cleaner maintenance (AEG Clean 6000 / Hygienic 6000 / Animal 6000 series)
Cause
- Air Channel / Cyclon is blocked
- The floor nozzle is blocked
- Filters are blocked
- Dust container needs emptying
- Hose is blocked
Was this article helpful?
Related Articles
- AEG cordless vacuum cleaner care guide: Do's and Don’ts
- Battery replacement in cordless vacuum cleaners
- Stick vacuum cleaner does not charge the batteries
- 8000 series vacuum cleaner - control panel icons
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - charging problems
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “Dirty Water Tank Full” icon blinks
- Cordless vacuum cleaner maintenance (AEG Clean 6000 / Hygienic 6000 / Animal 6000 series)
- My Cordless Ergorapido vacuum cleaner stops after a short time, lights flashing
- Stick vacuum cleaner stops or does not start
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “TURBO” flashes on the display
Related Articles
- AEG cordless vacuum cleaner care guide: Do's and Don’ts
- Battery replacement in cordless vacuum cleaners
- Stick vacuum cleaner does not charge the batteries
- 8000 series vacuum cleaner - control panel icons
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - charging problems
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “Dirty Water Tank Full” icon blinks
- Cordless vacuum cleaner maintenance (AEG Clean 6000 / Hygienic 6000 / Animal 6000 series)
- My Cordless Ergorapido vacuum cleaner stops after a short time, lights flashing
- Stick vacuum cleaner stops or does not start
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “TURBO” flashes on the display