The dishwasher door slams shut
Resolution
Issue
- The dishwasher door slams shut.
- The dishwasher door closes itself - the appliance cannot be loaded
Applies to
- Integrated dishwashers
Resolution
1. It is necessary to install the outer doors panel for hinges to work correctly.
For more information refer to installation instruction supplied with your appliance. Download .
2. Contact an Authorized Service Center.
If the above suggestions does not solve the problem, we recommend requesting a visit by a service engineer.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Where and how do I change the basic settings on my AEG dishwasher
- Dishwasher displays error code i10, i11, AL5, C1, beeps once, or the warning light flashes once
- Dishwasher displays error code i30
- How to move the upper basket in your AEG dishwasher
- Dishwasher is making unusual noises
- How to adjust water hardness level in dishwasher
- Dishwasher does not beep at the end of the cycle
- Compact dishwasher displays error message E3
- Dishwasher installation (Sliding door)
- How to set the programme with QuickSelect on your AEG dishwasher
Related Articles
- Where and how do I change the basic settings on my AEG dishwasher
- Dishwasher displays error code i10, i11, AL5, C1, beeps once, or the warning light flashes once
- Dishwasher displays error code i30
- How to move the upper basket in your AEG dishwasher
- Dishwasher is making unusual noises
- How to adjust water hardness level in dishwasher
- Dishwasher does not beep at the end of the cycle
- Compact dishwasher displays error message E3
- Dishwasher installation (Sliding door)
- How to set the programme with QuickSelect on your AEG dishwasher