Tumble dryer displays error code E54
Issue
- Tumble dryer displays error code E54
Applies to
- Tumble dryers
Resolution
- Reduce the load of laundry
- Check that there is no excessively heavy object in the drum, e.g. a duvet
- Check another socket and make sure that there are no other appliances running at the same time
- If the above steps are not successful, we recommend contacting an authorised service centre
Cause
- Error code E54 indicates a motor control problem
Was this article helpful?
Related Articles
- Tumble dryer’s water tank is empty
- Warning light(s) of tumble dryer cannot be switched off
- Tumble dryer's Condenser LED is on
- Cleaning tumble dryer filters and condenser
- Condenser Dryer Drain Kit
- Clothes are still wet at the end of the drying cycle
- Tumble dryer's drying results are poor and laundry is damp after drying
- Tumble Dryer Has No Power or Does Not Start
- How to clean and maintain your AEG tumble dryer
- AEG tumble dryer care guide: Do's and Don'ts
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Tumble dryer’s water tank is empty
- Warning light(s) of tumble dryer cannot be switched off
- Tumble dryer's Condenser LED is on
- Cleaning tumble dryer filters and condenser
- Condenser Dryer Drain Kit
- Clothes are still wet at the end of the drying cycle
- Tumble dryer's drying results are poor and laundry is damp after drying
- Tumble Dryer Has No Power or Does Not Start
- How to clean and maintain your AEG tumble dryer
- AEG tumble dryer care guide: Do's and Don'ts