Tumble dryer displays error code EBD
Issue
- Tumble dryer displays error code EBD or EHD
Applies to
- Tumble dryers
Resolution
The first step in diagnosing a problem with a tumble dryer displaying the EBD or EHD error code is to check whether the socket the appliance is plugged into is working properly. If possible, try another socket to make sure it is receiving power correctly.
The next step is to check the grounding of the appliance. Grounding is essential for the safe operation of most electrical appliances, and its absence can lead to equipment malfunction or even pose a life-threat.
If the electrical outlet is functioning correctly and a ground connection is established, yet the EBD error still appears on the dryer's display, we recommend contacting an authorized service center.
Important: Attempting to fix the electrical problem yourself without the appropriate qualifications may cause further damage to the appliance or put the user at risk.
See also:
- Expert Guide: Answers to frequently asked questions about tumble dryers.
- Find out more about our repair services: Tumble dryer repairs | In and out of warranty.
- Find a solution to your problem in our help articles: Support Centre articles in the tumble dryers category.
Cause
- electrical Noise
Was this article helpful?
Related Articles
- Tumble dryer does not start / does not work
- Drying Temperature in Heat Pump Tumble Dryer
- Water leakage from under the dryer
- Tumble dryer displays error message EHO, EH0
- Cleaning tumble dryer filters and condenser
- Start - Pause LED flashes on tumble dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E60 and does not heat up
- Condenser tumble dryer taking too long to finish
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Tumble dryer does not start / does not work
- Drying Temperature in Heat Pump Tumble Dryer
- Water leakage from under the dryer
- Tumble dryer displays error message EHO, EH0
- Cleaning tumble dryer filters and condenser
- Start - Pause LED flashes on tumble dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E60 and does not heat up
- Condenser tumble dryer taking too long to finish