Washing machine displays error message C9 or F9
Issue
- Washing machine displays the error message C9 or F9
Applies to
- Washing machine
Resolution
Resetting is recommended on early machines.
Resetting guide:
C9 error:
- Start by closing the door and setting the cycle selector to zero.
- Press the two buttons at the top (soak and pre-wash).
- At the same time, turn the cycle selector counter-clockwise to the delicate spin cycle.
- Then release the two buttons and continue turning the selector counter-clockwise all the way round to off (almost one full turn).
- Try to wash normally.
- If the display continues to show error C9, the bearings in the appliance’s motor may be faulty.
Important: Only reset the appliance once. Frequent resetting contributes to the wearing off of the motor.
Motor:
- If the problem reoccurs, there is probably a fault in the motor or the motor’s bearings.
If the above suggestion does not resolve the issue, contact an Authorized Service Center.
Cause
- Error message C9 or F9 indicates an imbalance during a spin cycle.
- faulty motor or motor bearings
Was this article helpful?
Related Articles
- Washing Machine Not Working or Not Turning On – Troubleshooting Guide
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine glass door has scratches from inside or is cracked
- Why are there holes in my laundry after washing? How to prevent holes in washing machine laundry?
- Washing machine does not heat up and does not display an error message
- How to sanitize my washing machine?
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- AEG Washing Machine displays an error code - causes and solutions
- AEG washing machine – how to reset the WiFi settings
- Laundry Is Highly Wrinkled After Washing
Related Articles
- Washing Machine Not Working or Not Turning On – Troubleshooting Guide
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine glass door has scratches from inside or is cracked
- Why are there holes in my laundry after washing? How to prevent holes in washing machine laundry?
- Washing machine does not heat up and does not display an error message
- How to sanitize my washing machine?
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- AEG Washing Machine displays an error code - causes and solutions
- AEG washing machine – how to reset the WiFi settings
- Laundry Is Highly Wrinkled After Washing