Compact dishwasher displays error message E1, does not fill with water
Issue
- Compact dishwasher displays error message E1
- The appliance does not fill with water
- Compact dishwasher emits an acoustic signal for approximately 30 seconds
Applies to
- Integrated compact dishwasher
- Free-standing compact dishwasher
Resolution
This error code indicates that the tap is not open or water intake is restricted, or water pressure is too low.
1. Make sure that the water tap is open.
2. Make sure that the water tap is not clogged.
3. Make sure that the pressure of the water supply is not too low.
Recommended water pressure is between 0.04-1.0MPa.
For this information, contact your local water authority.
Was this article helpful?
Related Articles
- How To Raise Dishwasher Upper Basket
- Dishwasher comfort lift basket stuck in the UPPER position
- The dishwasher door opens after 2 minutes
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- How to adjust water hardness level in dishwasher
- There is a lot of foam in my dishwasher
- Dishwasher displays error code i30
- Dishwasher does not switch on, no light on the control panel
- How to deactivate/turn off AirDry/door opens automatically on AEG dishwasher
- Dishwasher does not / will not start but the power is on