Dishwasher door will not close properly or is crooked
Resolution
Issue:
- Dishwasher door will not close properly or is crooked
Applies to:
- Integrated dishwasher
Resolution:
1. Make sure the appliance is correctly levelled
Try adjusting the appliance feet and checking it again with a spirit level
2. Contact the engineer who installed the appliance to ensure that the latch and door have been installed in accordance with the installation manual.
Misalignment of latches and/or hinges can cause the dishwasher door to not close properly or be crooked
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Cause:
- Misalignment of latches and/or hinges can cause the dishwasher door to not close properly or be crooked
Was this article helpful?
Related Articles
- Integrated built-in dishwasher door stuck closed
- Dishwasher Tablets Do Not Fully Dissolve / Left In the Base
- Dishwasher displays error code I20, C2, F2 or AL6, or beeps twice, not draining
- Dishwasher does not beep at the end of the cycle
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher does not / will not start but the power is on
- Dishwasher installation (Sliding door)
- Dishwasher not cleaning properly
- Dishwasher has poor washing results
- How can I order a spare part for my AEG dishwasher?