How to clean an oven with catalytic liner (video)
Issue
- How to clean an oven with a catalytic liner
Applies to
- built-in oven
- freestanding cooker
Resolution
Catalytic Enamel - Self-Cleaning Liners (Rough Sides)
These liners absorb grease which is oxidised when the oven is set to clean. You can achieve a catalytic clean by:
- Removing the shelves and oven accessories.
- Wiping out the bottom of the cavity and the door using warm water and an oven cleaner. We recommend using our . (Do not put cleaners on the liners themselves).
- Set the oven to 250°C and leave it to self-clean for about an hour.
- Once cooled wipe out the grease and debris from the bottom of the oven.
- Repeat if necessary - Please note there may be marks left on the liners, this is normal and will not affect the oven.
Please see the instructional video.
Was this article helpful?
Related Articles
- Oven does not heat up
- How to clean the AEG oven manually? (video)
- How to remove oven shelf supports for cleaning
- Turning AEG Command Wheel Oven Demo Mode On and Off (Video)
- How to use Pyrolytic Cleaning on your AEG oven
- Symbols and functions on your AEG oven or cooker
- How to set an oven timer - AEG
- The time is not shown on the display when the oven is turned off
- How to set an oven clock
- Condensation in Oven Cavity and Oven Door