How to reset WiFi network settings on my AEG dryer
Issue
- How to reset WiFi network settings on my AEG dryer?
Applies to
- AEG tumble dryers with WiFi connection
Resolution
Depending on the model of the dryer, follow the steps below
8000 series tumble dryer


2. Tap on the WiFi bar, and a new menu is shown.
3. Tap on Reset network
9000 series tumble dryer
Control Panel No.1

1. Press and hold the Time Drying and Refresh buttons for at least 10 seconds simultaneously until the second acoustic signal.
- - - appears on the display
Control panel No.2

1. To remove the wireless credentials, touch and hold down the Remote Start button for around 10 seconds until you hear 2 'beeps' sound. The symbol: - - - appears on the display
Further information can be found in the .
Was this article helpful?
Related Articles
- Heat pump dryer's drying cycle is too long
- Tumble dryer has no power
- How to clean and maintain your AEG tumble dryer to prolong its life
- Tumble dryer does not start / does not work
- How to use the Steam programme on your AEG tumble dryer
- How to clean and maintain your AEG tumble dryer
- Before using your AEG tumble dryer for the first time
- Tumble dryer is leaking
- The time displayed on the tumble dryer display does not match the time indicated on the energy label
- Excessive moisture in room, on walls and windows where the tumble dryer is located