The oven takes a long time to activate from standby and shows three dots on the display
Issue
When pressing the ON button of the oven on standby, it takes some seconds until the oven is ready to be used.
There are three dots shown in the oven display (as shown below).
The oven takes longer than expected to turn on
Resolution
The issue can be resolved by connecting the appliance to the WiFi network.
You can find information on how to connect your appliance to your WIFI in the user manual chapter “Wireless connection”.
After connecting the appliance to your WiFi, the issue should be resolved.
Was this article helpful?
Related Articles
- Symbols and functions on your AEG oven or cooker
- Using the Oven Grill Function
- How to set an oven clock
- Oven steam self - cleaning function
- Oven does not heat up
- The door of the oven does not close properly
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- Oven blows / trips fuses
- How to prove the dough in the oven, if it is not equipped with special programme?
- How to use Catalytic Cleaning on your AEG oven