Oven Clock or display goes dark, dims or switches off
Issue
- Issue of clock/screen going blank or dimming after a few seconds
Applies to
- Ovens
- Double ovens
- Cookers
Resolution
Some models have a standby mode and the screen will dim after a period of inactivity. To see if this applies to your model, please refer to your user manual which you can download by registering or visiting our User Manuals page. See the links attached.
The issues could be caused by a poor connection or fault with the power supply within the appliance, this is not a common fault.
- Switch the appliance off at the mains and switch back on after 30 minutes.
- There is a technical fault if switching the appliance off does not clear a fault.
Please contact a member of our team.
Was this article helpful?
Related Articles
- How to remove a built-in oven door (video)
- Oven displays code F102
- How to set the clock on an AEG oven
- The time is not shown on the display when the oven is turned off
- How to set an oven timer - AEG
- Symbols and functions on your AEG oven or cooker
- How to clean and care for your AEG oven
- The door of the oven does not close properly
- How to use Catalytic Cleaning on your AEG oven
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix
Related Articles
- How to remove a built-in oven door (video)
- Oven displays code F102
- How to set the clock on an AEG oven
- The time is not shown on the display when the oven is turned off
- How to set an oven timer - AEG
- Symbols and functions on your AEG oven or cooker
- How to clean and care for your AEG oven
- The door of the oven does not close properly
- How to use Catalytic Cleaning on your AEG oven
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix