Tumble dryer displays error message C6
Resolution
Issue:
- Tumble dryer displays error message C6
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code C6, there is a problem with the moisture sensor.
The cycle takes longer than normal, more than 4.5 hours.
- Check if the machine is connected to an grounded socket.
- If not, there is a problem with the moisture measurement, which can be repaired by an Authorized Service Center.
2. To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Condenser tumble dryer taking too long to finish
- Clothes are still wet at the end of the drying cycle
- Drying Temperature in Heat Pump Tumble Dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer displays error code E54
- Tumble dryer emits unusual noises
- Tumble dryer’s water tank is empty
- Tumble dryer displays error message EHO, EH0
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message "Err"