Tumble dryer displays error message CE / CF
Issue
- Tumble dryer displays error message CE / CF
Applies to
- tumble dryer
Resolution
1. If the tumble dryer displays error code CE or CF, there is a problem with the electronics.
2. To resolve this issue, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Water leakage from under the dryer
- How long does a full load dry to dry take in a dryer - heatpump vs condenser?
- Clothes are still wet at the end of the drying cycle
- Cleaning tumble dryer filters and condenser
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer ends the programme immediately after the start
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message E50
- Tumble dryer's drying results are poor and laundry is damp after drying
- Condenser tumble dryer taking too long to finish